Characteristics of Allergic Harvest PC

The complete set for the building of a 4-meter greenhouse 3 sheets of cellular polycarbonate in the kind of rolls of 2.1 m in length and a diameter of 60-90 cm. The depth of this substance is 4 mm.

If you want, you are able to increase the duration of the construction to 6 metres or more. To try it, it’s enough to join a two-meter extension. When picking a drawing, then focus on the space between the arches. This figure must be 65 cm, that’s the most appropriate length for the specified thickness of this material. The diameter of the doorways based on the maker’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, it is necessary to pick a place because of the location. If that is done correctly, it is possible to provide yourself with a harvest of fresh veggies for the whole calendar year.

The location for the upcoming greenhouse is marked instantly at the preparation of the garden plot. So as to melt the snow at the location of their greenhouse as soon as possible, the very best point on the site will be a small elevation. In addition, in such a location will not need to be concerned about high humidity as dirt and air inside the structure.

Build a polycarbonate greenhouse in a raised site – means to look after the optimal temperature inside.

When it isn’t possible to put a greenhouse in an elevated position, you will have to pour a coating of fine crushed stone around 20 cm and the same layer of fertile soil to make seedbeds.

Before assembling a greenhouse on your garden plot, you should also think about where and how this structure is going to be installed. To begin with, you have to pick a location for it. The greenhouse ought to be found at a metropolitan region at least a few meters away from homes, barns and other structures.

The best way to install a greenhouse according to the Faces of the Planet

Be sure to level the dirt surface – it is ideal to even remove the surface. This can also eliminate weed seeds. And for simplicity of work, remove the soil in an area that’s going to a meter wider on all sides of the rectangle that you want.

In addition, it is worth considering having a foundation. As producers say, now most greenhouses do not need it, especially if they (greenhouses) are used only in the summer and spring period. However, experienced gardeners still suggest making at least a basic basis from a pub. It is quite simple – it is enough to associate with each other using metal screws and corners four pieces of wood using a cross-section of 10 * 10 cm. The size of such a base should be equal to the foundation of their upcoming greenhouse.

Simple bar foundation

You may even create a strip foundation of concrete. He’s more dependable than a bar base, but demands greater fiscal and labor costs. By the way, the rainwater, which is utilised in winter, with no and do not do without it at all.

Stages of the formation of a strip foundation: a schematic representation

Many manufacturers counsel to install greenhouse structures without even creating a foundation. For this function, they equip the framework with special T-shaped legs, so that the construction was firmly fixed. However, as practice shows, it’s still essential to construct a base: so and the foundation will be more firmly fixed and also the elements of the basis that are in contact with the ground, will be saved much more in its initial state.

The main thing is to treat the material with specific agents to protect the wood from moisture. The material is usually installed on concrete cubes that are dug into the soil. To get a six-meter structure, they need 10 bits: four on either side and one in the center of the ends.

Before you perform the greenhouse , you have to select the best spot for it. It must be an even website, so that the frame was found equally, without distortions. It should be sunny and not obscured by buildings or trees.